2013 Ford E350 Vans XLT15 PassengerClean CarfaxBest Price in Town for Sale

Wolf’s economy retro-styled scooter, but don’t let the word “economy” fool you! Great styling and excellent gas mileage make for a great buy. This scooter is above average in its class and is built with the same quality parts as our other Wolf scooters. Well suited for light day-to-day, inner-city travel, the Islander enjoys long rides on the New 2023 White Wolf’s economy retro-styled scooter, but don’t let the word “economy” fool you! Great styling and excellent gas mileage make for a great buy. This scooter is above average in its class and is built with the same quality parts as our other Wolf scooters. Well suited for light day-to-day, inner-city travel, the Islander enjoys long rides on the New 2023 White Wolf’s economy retro-styled scooter, but don’t let the word “economy” fool you! Great styling and excellent gas mileage make for a great buy. This scooter is above average in its class and is built with the same quality parts as our other Wolf scooters. Well suited for light day-to-day, inner-city travel, the Islander enjoys long rides on the New 2023 White Wolf’s economy retro-styled scooter, but don’t let the word “economy” fool you! Great styling and excellent gas mileage make for a great buy. This scooter is above average in its class and is built with the same quality parts as our other Wolf scooters. Well suited for light day-to-day, inner-city travel, the Islander enjoys long rides on the New 2023 White Wolf’s economy retro-styled scooter, but don’t let the word “economy” fool you! Great styling and excellent gas mileage make for a great buy. This scooter is above average in its class and is built with the same quality parts as our other Wolf scooters. Well suited for light day-to-day, inner-city travel, the Islander enjoys long rides on the New 2023 White

One of the most russian legendary brand Izh and their product Izh jupiter 3 is now for sale. Amazing and unique bike for restoration. This Izh jupiter 3 start run and accelerate to 65 MPH. Thank you. About: Model: IZH Jupiter 3Year: 1975Engine and transmission Displacement: 347.00 ccm (21.17 cubic inches)Engine type: Twin, two-stroke Power: 25.00 HP (18.2 k W)) @ 5200 RPMTop speed: 74.6 mph Compression: 8.5:1Bore x stroke: 2.4 x 2.3 inches Fuel control: Port control Cooling system: Air Gearbox: 4-speed Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Front tyre: 3.50-18Rear tyre: 3.50-18Front brakes: Expanding brake Rear brakes: Expanding brake Physical measures and capacities Weight incl. oil, gas, etc: 377.0 pounds Fuel capacity: 4.76 gallons Used 1975 4,731 miles One of the most russian legendary brand Izh and their product Izh jupiter 3 is now for sale. Amazing and unique bike for restoration. This Izh jupiter 3 start run and accelerate to 65 MPH. Thank you. About: Model: IZH Jupiter 3Year: 1975Engine and transmission Displacement: 347.00 ccm (21.17 cubic inches)Engine type: Twin, two-stroke Power: 25.00 HP (18.2 k W)) @ 5200 RPMTop speed: 74.6 mph Compression: 8.5:1Bore x stroke: 2.4 x 2.3 inches Fuel control: Port control Cooling system: Air Gearbox: 4-speed Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Front tyre: 3.50-18Rear tyre: 3.50-18Front brakes: Expanding brake Rear brakes: Expanding brake Physical measures and capacities Weight incl. oil, gas, etc: 377.0 pounds Fuel capacity: 4.76 gallons Used 1975 4,731 miles One of the most russian legendary brand Izh and their product Izh jupiter 3 is now for sale. Amazing and unique bike for restoration. This Izh jupiter 3 start run and accelerate to 65 MPH. Thank you. About: Model: IZH Jupiter 3Year: 1975Engine and transmission Displacement: 347.00 ccm (21.17 cubic inches)Engine type: Twin, two-stroke Power: 25.00 HP (18.2 k W)) @ 5200 RPMTop speed: 74.6 mph Compression: 8.5:1Bore x stroke: 2.4 x 2.3 inches Fuel control: Port control Cooling system: Air Gearbox: 4-speed Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Front tyre: 3.50-18Rear tyre: 3.50-18Front brakes: Expanding brake Rear brakes: Expanding brake Physical measures and capacities Weight incl. oil, gas, etc: 377.0 pounds Fuel capacity: 4.76 gallons Used 1975 4,731 miles One of the most russian legendary brand Izh and their product Izh jupiter 3 is now for sale. Amazing and unique bike for restoration. This Izh jupiter 3 start run and accelerate to 65 MPH. Thank you. About: Model: IZH Jupiter 3Year: 1975Engine and transmission Displacement: 347.00 ccm (21.17 cubic inches)Engine type: Twin, two-stroke Power: 25.00 HP (18.2 k W)) @ 5200 RPMTop speed: 74.6 mph Compression: 8.5:1Bore x stroke: 2.4 x 2.3 inches Fuel control: Port control Cooling system: Air Gearbox: 4-speed Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Front tyre: 3.50-18Rear tyre: 3.50-18Front brakes: Expanding brake Rear brakes: Expanding brake Physical measures and capacities Weight incl. oil, gas, etc: 377.0 pounds Fuel capacity: 4.76 gallons Used 1975 4,731 miles One of the most russian legendary brand Izh and their product Izh jupiter 3 is now for sale. Amazing and unique bike for restoration. This Izh jupiter 3 start run and accelerate to 65 MPH. Thank you. About: Model: IZH Jupiter 3Year: 1975Engine and transmission Displacement: 347.00 ccm (21.17 cubic inches)Engine type: Twin, two-stroke Power: 25.00 HP (18.2 k W)) @ 5200 RPMTop speed: 74.6 mph Compression: 8.5:1Bore x stroke: 2.4 x 2.3 inches Fuel control: Port control Cooling system: Air Gearbox: 4-speed Transmission type, final drive: Chain Chassis, suspension, brakes and wheels Front tyre: 3.50-18Rear tyre: 3.50-18Front brakes: Expanding brake Rear brakes: Expanding brake Physical measures and capacities Weight incl. oil, gas, etc: 377.0 pounds Fuel capacity: 4.76 gallons Used 1975 4,731 miles

1965 Triumph Bonneville T120C 650cc. Older restoration but low mileage. The T120C was the 1965 iteration of what became known as the TT Special. This bike has the period correct Dunlop K70s, Dunlop wheels, correct Amal 931 carburetors and air cleaner, correct aluminum fenders, correct kill switch, correct tachometer and bracket, correct ET ignition coils, correct petbirds and correct package tray. Matching engine and frame numbers. Just changed transmission and engine oils and cleaned carburetors and petbirds. Compression is higher than standard Bonneville, so I am running leaded racing gas. Starts right up and sounds good. Used 1965 Triumph Bonneville 6,000 miles 1965 Triumph Bonneville T120C 650cc. Older restoration but low mileage. The T120C was the 1965 iteration of what became known as the TT Special. This bike has the period correct Dunlop K70s, Dunlop wheels, correct Amal 931 carburetors and air cleaner, correct aluminum fenders, correct kill switch, correct tachometer and bracket, correct ET ignition coils, correct petbirds and correct package tray. Matching engine and frame numbers. Just changed transmission and engine oils and cleaned carburetors and petbirds. Compression is higher than standard Bonneville, so I am running leaded racing gas. Starts right up and sounds good. Used 1965 Triumph Bonneville 6,000 miles 1965 Triumph Bonneville T120C 650cc. Older restoration but low mileage. The T120C was the 1965 iteration of what became known as the TT Special. This bike has the period correct Dunlop K70s, Dunlop wheels, correct Amal 931 carburetors and air cleaner, correct aluminum fenders, correct kill switch, correct tachometer and bracket, correct ET ignition coils, correct petbirds and correct package tray. Matching engine and frame numbers. Just changed transmission and engine oils and cleaned carburetors and petbirds. Compression is higher than standard Bonneville, so I am running leaded racing gas. Starts right up and sounds good. Used 1965 Triumph Bonneville 6,000 miles 1965 Triumph Bonneville T120C 650cc. Older restoration but low mileage. The T120C was the 1965 iteration of what became known as the TT Special. This bike has the period correct Dunlop K70s, Dunlop wheels, correct Amal 931 carburetors and air cleaner, correct aluminum fenders, correct kill switch, correct tachometer and bracket, correct ET ignition coils, correct petbirds and correct package tray. Matching engine and frame numbers. Just changed transmission and engine oils and cleaned carburetors and petbirds. Compression is higher than standard Bonneville, so I am running leaded racing gas. Starts right up and sounds good. Used 1965 Triumph Bonneville 6,000 miles 1965 Triumph Bonneville T120C 650cc. Older restoration but low mileage. The T120C was the 1965 iteration of what became known as the TT Special. This bike has the period correct Dunlop K70s, Dunlop wheels, correct Amal 931 carburetors and air cleaner, correct aluminum fenders, correct kill switch, correct tachometer and bracket, correct ET ignition coils, correct petbirds and correct package tray. Matching engine and frame numbers. Just changed transmission and engine oils and cleaned carburetors and petbirds. Compression is higher than standard Bonneville, so I am running leaded racing gas. Starts right up and sounds good. Used 1965 Triumph Bonneville 6,000 miles

This Harley-Davidson is in very good condition. It was restored approximately 25 years ago and was ridden a couple of times and stored. It only took cleaning the carb and fuel valve, new battery, and oil change for this machine to fire up. Runs good. Used 1949 10 miles This Harley-Davidson is in very good condition. It was restored approximately 25 years ago and was ridden a couple of times and stored. It only took cleaning the carb and fuel valve, new battery, and oil change for this machine to fire up. Runs good. Used 1949 10 miles This Harley-Davidson is in very good condition. It was restored approximately 25 years ago and was ridden a couple of times and stored. It only took cleaning the carb and fuel valve, new battery, and oil change for this machine to fire up. Runs good. Used 1949 10 miles This Harley-Davidson is in very good condition. It was restored approximately 25 years ago and was ridden a couple of times and stored. It only took cleaning the carb and fuel valve, new battery, and oil change for this machine to fire up. Runs good. Used 1949 10 miles This Harley-Davidson is in very good condition. It was restored approximately 25 years ago and was ridden a couple of times and stored. It only took cleaning the carb and fuel valve, new battery, and oil change for this machine to fire up. Runs good. Used 1949 10 miles

1969 Harley Davidson Shovel-Head Original Paint Survivor! Low original 19k miles from new. Runs and Rides Great! Thanks for watching! Used 1969 Harley-Davidson Touring 18,624 miles 1969 Harley Davidson Shovel-Head Original Paint Survivor! Low original 19k miles from new. Runs and Rides Great! Thanks for watching! Used 1969 Harley-Davidson Touring 18,624 miles 1969 Harley Davidson Shovel-Head Original Paint Survivor! Low original 19k miles from new. Runs and Rides Great! Thanks for watching! Used 1969 Harley-Davidson Touring 18,624 miles 1969 Harley Davidson Shovel-Head Original Paint Survivor! Low original 19k miles from new. Runs and Rides Great! Thanks for watching! Used 1969 Harley-Davidson Touring 18,624 miles 1969 Harley Davidson Shovel-Head Original Paint Survivor! Low original 19k miles from new. Runs and Rides Great! Thanks for watching! Used 1969 Harley-Davidson Touring 18,624 miles

The BMW OEM style finned deep aluminum engine oil pan now carries Valvoline VR-1 SAE 40 racing oil. After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, new Emerald Island ignition coil, ignition points and condenser. Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾â€ sparkplug reach LK cylinder heads underwent rebuild as necessary. German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers. In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc. New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work. The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi brand rim tape after which the tire and wheel assemblies were balanced. A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer check out/break-in riding mileage readings. The larger 6.5 gallon/24.6 liter “Sport Tank ” is installed and fitted with a new Karcoma petbird in lieu of an earlier somewhat fussy Everbest petbird. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters. The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner. Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium. The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped. An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new. The rear fender is fitted with a luggage rack as well as its replated original iconic “R69S” emblem. Used 1965 BMW R-series 24,156 miles, White The BMW OEM style finned deep aluminum engine oil pan now carries Valvoline VR-1 SAE 40 racing oil. After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, new Emerald Island ignition coil, ignition points and condenser. Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾â€ sparkplug reach LK cylinder heads underwent rebuild as necessary. German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers. In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc. New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work. The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi brand rim tape after which the tire and wheel assemblies were balanced. A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer check out/break-in riding mileage readings. The larger 6.5 gallon/24.6 liter “Sport Tank ” is installed and fitted with a new Karcoma petbird in lieu of an earlier somewhat fussy Everbest petbird. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters. The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner. Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium. The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped. An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new. The rear fender is fitted with a luggage rack as well as its replated original iconic “R69S” emblem. Used 1965 BMW R-series 24,156 miles, White The BMW OEM style finned deep aluminum engine oil pan now carries Valvoline VR-1 SAE 40 racing oil. After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, new Emerald Island ignition coil, ignition points and condenser. Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾â€ sparkplug reach LK cylinder heads underwent rebuild as necessary. German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers. In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc. New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work. The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi brand rim tape after which the tire and wheel assemblies were balanced. A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer check out/break-in riding mileage readings. The larger 6.5 gallon/24.6 liter “Sport Tank ” is installed and fitted with a new Karcoma petbird in lieu of an earlier somewhat fussy Everbest petbird. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters. The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner. Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium. The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped. An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new. The rear fender is fitted with a luggage rack as well as its replated original iconic “R69S” emblem. Used 1965 BMW R-series 24,156 miles, White The BMW OEM style finned deep aluminum engine oil pan now carries Valvoline VR-1 SAE 40 racing oil. After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, new Emerald Island ignition coil, ignition points and condenser. Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾â€ sparkplug reach LK cylinder heads underwent rebuild as necessary. German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers. In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc. New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work. The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi brand rim tape after which the tire and wheel assemblies were balanced. A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer check out/break-in riding mileage readings. The larger 6.5 gallon/24.6 liter “Sport Tank ” is installed and fitted with a new Karcoma petbird in lieu of an earlier somewhat fussy Everbest petbird. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters. The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner. Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium. The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped. An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new. The rear fender is fitted with a luggage rack as well as its replated original iconic “R69S” emblem. Used 1965 BMW R-series 24,156 miles, White The BMW OEM style finned deep aluminum engine oil pan now carries Valvoline VR-1 SAE 40 racing oil. After disassembly, degreasing and bead blasting, the magneto was serviced with a remagnetized rotor, new Emerald Island ignition coil, ignition points and condenser. Replacement Kolbenschmidt pistons were sourced and balanced and the semi-gloss black powdercoated cylinders bored/honed to fit. The bead blasted ¾â€ sparkplug reach LK cylinder heads underwent rebuild as necessary. German chrome exhaust headers are installed with a stainless steel crossover tube and unseamed German chrome mufflers. In order to improve engine acceleration/deceleration and thereby improve shifting, a Barrington Motor Works aluminum flywheel was installed along with a sprung type 9mm clutch friction disc. New Eurobars were installed. After servicing and refinishing the hand controls and switches, they were installed with new control cables. The hand control levers were professionally polished. Bar end adapters fabricated by Joe Groeger were installed and permitted the installation together of Albert bar end mirrors as well as Hella bar end signals. New Magura hand grips completed the handlebar work. The transmission underwent a complete rebuild including all new FAG bearings as well as new seals and rear cover gasket. The kickstart and foot shift levers were professionally polished. The transmission was filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. The vented 25/8 final drive was rebuilt with all new FAG and INA bearings, new seals and gasket. Like the transmission, the swingarm and final drive were filled to spec with Brad Penn GL-4 SAE 80/90 gear oil. After rebuilding the wheel hubs with correctly shimmed Timken 30304 tapered roller bearings and modern lip seals the high shoulder aluminum Weinmann rims were straightened and polished and then laced and trued to the hubs with stainless steel spokes by Buchanan Spoke and Rim. New Heidenau 3.50” x 18” K34 tires are installed with Heidenau natural rubber inner tubes and Tesi brand rim tape after which the tire and wheel assemblies were balanced. A new harness was installed as was a 35W/35W H4 headlight assembly and LED tail light. The VDO 1.2 speedometer, correct for the 25/8 final drive, was rebuilt and retains both the original pre-remanufacture odometer and post-remanufacture trip odometer check out/break-in riding mileage readings. The larger 6.5 gallon/24.6 liter “Sport Tank ” is installed and fitted with a new Karcoma petbird in lieu of an earlier somewhat fussy Everbest petbird. New fabric covered fuel lines are installed with high flow in-line pancake fuel filters. The Bing 1/26/91 and 1/26/92 carburetors were cleaned ultrasonically and rebuilt using Bench Mark Works plastic floats. Barrington Motor Works vacuum fittings were installed to facilitate owner carburetor synchronization. All internal parts were cleaned, evaluated and replaced as needed. A new air filter is installed in the refinished chokeless air cleaner. Because Barrington Motor Works builds reduced maintenance rideable restorations while honoring the past designers and constructors of these vintage motorcycles, high quality stainless steel fasteners with Nylon locking nuts, stainless steel pushrod tubes, stainless steel spokes, and high quality stainless steel axles are fitted. Where necessary and appropriate, certain fasteners and other parts were replated in cadmium. The steering head bearings and all swingarm bearings and seals were replaced after confirming that the frame, forks, and both swingarms were not bent. The frame and other related heavy parts have been professionally powdercoated in 80% gloss custom mixed Dover White matching the Dover White repainted sheetmetal. The sheetmetal has been professionally hand striped. An original BMW OEM hydraulic steering damper was serviced, refinished and installed. An OEM BMW sidestand is installed. Replacement shock eye silent blocks are installed front and rear and all four shock inserts are new. The rear fender is fitted with a luggage rack as well as its replated original iconic “R69S” emblem. Used 1965 BMW R-series 24,156 miles, White